Bag Filter Housing Manufacture

Filtedge recommends comprehensively analyzing factors such as flow rate, filtration precision (micron rating), liquid viscosity, solids content, pressure, temperature, operating duration, and installation space before selecting the size. Should you have any questions, our bag filter housing manufacturing engineers will confirm the specific dimensions for you based on the actual situation.

The liquid to be filtered enters the housing in a specified direction. Solid-liquid separation occurs within the filter through the internal filter bag, with the clean liquid discharged afterward. The internal support structure prevents bag collapse and bypassing.

Please use flow rate and filter bag replacement frequency as your criteria for evaluation. If your filtration system requires continuous long-term operation with high flow rates, and frequent filtration cycles necessitate regular filter bag replacements, Filtedge—as a multi-bag filter housing manufacturer —can provide systems ranging from 2 to 23 bags to accommodate scalable flow demands.

Yes, but the design must accommodate the liquid conditions with either a larger filtration area or a lower flow rate. If necessary, incorporate a pressurized pump or a parallel configuration. For exceptionally high-viscosity liquids, as a bag filter housing manufacturer, we optimize designs for viscosity and sediment load.

Different filtration precisions capture particles of varying sizes. Selecting the appropriate micron rating is essential for effective filtration; otherwise, incomplete filtration may occur. Typically:

– 1μm intercepts fine particles (e.g., pharmaceutical solutions)

– 5–10μm suits general industrial filtration

– 20μm is commonly used for coarse filtration or pre-treatment

Please provide your liquid specifications for tailored recommendations.

Our standard bag filters operate at 6–10 bar. For high-pressure applications, we offer custom versions rated for 16–25 bar or higher. Contact us, custom high-pressure designs are available directly from our bag filter housing factory.

As a bag filter housing supplier, we supply ISO, CE, and FDA-certified filters. For ASME or other certifications, Filtedge can assist with certification procurement—advance notice of delivery requirements and other conditions is necessary.

When the filter is available, measure its internal support structure and diameter for confirmation. For filters in the design phase, our factory will confirm dimensions based on your actual operating conditions and flow rate requirements.

Filtedge stainless steel filters withstand temperatures above 200°C. The accompanying filter bags must also be selected from high-temperature resistant options or special materials like PVDF.

The frequency of filter bag replacement primarily depends on the liquid’s solid content and flow rate, typically ranging from hours to weeks. Filters with multi-bag configurations can extend the replacement cycle. Contact our bag filter vessel manufacturer team for sizing.

Provide your liquid characteristics and actual operating parameters. You will achieve a 30%-60% cost reduction after switching to our OEM bag filter housing manufacturing services.

This depends on the original system design. Parallel modular configurations allow alternating individual filter cartridge pauses without full system shutdown. For 24/7 continuous operation, we recommend upgrading to fully automated equipment.

Filtedge’s patented compression ring structure and bottom residual liquid drain port design significantly reduce material waste.

Specific maintenance tasks depend on the filter model but typically include inspecting seals, cleaning support baskets, checking drain ports, and monitoring pressure gauges. You could request a maintenance guide from our bag filter housing factory service team.

This depends on your operating conditions and filtration requirements. For coarse filtration stages like pre-filtration, some liquids may be reused after cleaning. However, for high-precision filtration or contaminated liquids, disposable filter bags are recommended.

Excessive solids content in the filtered liquid, high flow rates, severe inlet impact, or overly fine filtration precision selection are common causes of filter clogging.

Filtedge’s solution includes material-matched sealing rings, a three-point bag compression design, and optimized internal support strength to effectively prevent filter bag bypass. All seal upgrades are performed in-house by our industrial bag filter housing manufacturer.

Yes. Different pressure requirements for liquid filtration lead to varying pump energy consumption. Filtedge’s low-pressure-drop design reduces pump power consumption, enabling 5-20% energy savings.

Filtedge quick-opening lid filters minimize cleaning operation time, while swing-arm filters further assist in saving operational time. For demanding applications, filters with automatic blowdown, venting, and easy-clean bottom structures are also available.

Filtedge will provide you with the most cost-effective products and pricing based on comprehensive factors including filter media material, flow rate design, precision requirements, flange diameter, pressure rating, customization needs, purchase quantity, and delivery method. Contact us for a quote from the bag filter housing supplier.

Filtedge maintains warehouses in both the United States and China. Stock items are subject to availability at the bag filter housing manufacturing base and ship within 1-3 business days. OEM/ODM custom designs require 7–30 days, depending on quantity and complexity.

Filtedge imposes no minimum order quantity for bag filters. Trial orders start from 1 unit, with volume discounts available for bulk purchases. You can work directly with a bag filter housing manufacturer for project-based supply.

Filtedge ships to multiple countries and provides import/export documentation including commercial invoices, customs assistance, and declaration materials. These are part of our bag filter housing factory direct-to-global service.

As a bag filter housing manufacturer, Filtedge accepts various collaborations including custom drawings, samples, co-branding, and OEM/ODM production.

Filtedge offers free selection analysis. Provide your operating conditions and filtration requirements, and our bag filter housing manufacturing engineers will recommend suitable models and create CAD/P&ID drawings for seamless communication.

Filtedge’s bag filter housings are better suited for high-flow, high-particle, and heavily contaminated applications, serving as pre-filtration in filtration systems. Cartridge filter housings are generally used for fine filtration and low-flow scenarios, functioning as the depth filtration component within a filtration system.

This depends on your requirements. If the filtered liquid demands continuous operation without downtime, has high viscosity, or faces heavy contamination, a self-cleaning filter is more suitable.

You can perform a preliminary calculation using the formula: (Target Flow Rate ÷ Single Bag Capacity × Safety Factor). Our engineers will conduct a final detailed assessment based on your actual operating conditions.

Filtedge’s minimum order quantity for filters is one unit. We recommend consulting with us beforehand to minimize selection risks. As a liquid bag filter housing manufacturer, we aim to ensure correct fit.