Advantages of FiltEdge's Acrylic Filter Bag
No Condensation: FiltEdge provides you with water and oil repellent treatment acrylic filter bags, which will not condense or gum up in humid environments, allowing you to reduce the frequency of shutdowns and maintain temperature operation over time.
Long Life: Made of 100% pure Homopolymer Acrylic Needle Felt, it is acid and hydrolysis resistant and reduces bag breakage. For severe conditions, upgraded PTFE impregnation post-treatment extends acrylic filter bag life by 1.5-2 times, reducing your bag change frequency and long-term consumable costs.
Ultra-low Emission: Strict filter bag inspection with dense stitching and 0 light leakage, with PTFE Membrane, easily meets ultra-low emission (≤5-10mg/m³) environmental protection inspection.
High-quality Material: A FTIR report is included with the shipment, or you can send a third-party laboratory to test the material of each batch of acrylic filter bags for you, to ensure the authenticity of the goods.
What’s Acrylic Filter Bags
Filtedge’s acrylic filter bags can be used in applications such as waste incineration, asphalt production, coal grinding, power plants, spray dryers, and detergent production, where low-temperature, humid exhaust gases are generated. Customization is available to accommodate various dust collection equipment, including pulse jet dust collectors, reverse air dust collectors, and mechanical shaking dust collectors.
Filtedge offers old bag analysis services and provides reasonable operational solutions. When you encounter issues such as equipment commissioning or installation, our dedicated after-sales team is available 24/7 to respond promptly, helping you achieve efficient production.
Acrylic Filter Bag Selection and Classification
FiltEdge’s acrylic filter bag from the material, post-treatment process, structure and shape of the division and combination of products up to hundreds of types, you can send your working conditions or specific needs, our engineers will contact you within 24 hours. The following are the most commonly used types of acrylic filtration for your reference:
Standard Acrylic Filter BagYou can use it in wet, acidic, working temperature below 125 ℃ working conditions.
Water and Oil Repellent Acrylic Filter BagIt can resist condensation and is suitable for working conditions that are humid and prone to condensation leading to clogging of filter bags.
ePTFE Membrane Laminated Acrylic Filter BagAfter coating ePTFE, the precision can be improved, and it can be applied to the working condition that has the demand for ultra-low emission (<5mg/10mg).
Acrylic Filter Bag Performance
The excellent performance of Filtedge’s acrylic filter bags reduces costs and increases efficiency in your production.
Continuous operating temperature of 125°C, with a maximum instantaneous temperature of 140°C.
It exhibits excellent hydrolysis resistance, making it suitable for use in equipment operating in high-humidity environments.
Suitable for gases such as SO2/SO3/NOX/HCL, phosphides, and organic acids.
Low thermal shrinkage rate, stable structure, resistant to deformation, and long service life.
More cost-effective than other filter bags.
Suitable for various industrial dust collection systems such as pulse jet, reverse air, and shaking.
High capture efficiency for medium-sized dust particles; can be coated with PTFE for enhanced filtration efficiency.
It can be considered a low-energy filter material in medium-temperature dust collection systems.
Custom Acrylic Filter Bags
Filtedge offers OEM/ODM customization services tailored to your procurement needs and operational conditions, helping you optimize your business operations and production. Customization options for acrylic filter bags include: fabric type, dimensions, top and bottom construction, shape, surface treatment, sewing techniques, logo placement, packaging dimensions and methods, and label specifications.
Fast Delivery
Filtedge has dedicated shipping coordinators and import/export customs brokers who work with sales personnel to arrange shipping schedules and ensure the timely delivery of goods. Additionally, Filtedge maintains independent warehouses in North America and China, enabling rapid shipment of standard acrylic filter bags.
Applications of Acrylic Filter Bags
If your operating conditions involve low temperatures, humidity, and acidic gas dust, Filtedge’s acrylic filter bags are highly suitable. Examples include coal mill dust in cement plants, HCL/SO2/NOX acidic gases from waste incineration, asphalt mixing plants, and flue gas treatment in coal-fired power plants.
Acrylic Filter Bag Material
FiltEdge’s acrylic filter bags are available in 2 main materials, homopolymer acrylic or copolymer acrylic. The most commonly used fabric is 350-600gsm needle felted homopolymer acrylic. Homopolymer acrylic is 100% pure, high quality acrylonitrile needle felted. It can withstand higher temperatures (125°C) than copolymerized acrylic. In wet, acidic applications, homopolymer acrylic filter bags are less likely to corrode and break, and the service life can be directly increased by a factor of 2, reducing your long-term consumable costs and labor costs for bag changes.
Shape of Acrylic Filter Bag
We can manufacture both circular acrylic filter bags and envelope acrylic filter bags for you. However, circular acrylic filter bags are chosen by our customers the most because they have the widest range of applications. You can choose according to your dust collector and working condition requirements.
Acrylic Filter Bag Cleaning Method
FiltEdge’s acrylic filter bags have excellent dust cake stripping performance in humid acidic environment, not easy to paste and stick bags, very suitable for use in high-pressure pulse jet dust collector. With each pulse spray stroke, the dust can be easily shaken off, so that your dust collector can maintain low resistance operation for a long time. It is corrosion-resistant and durable, which reduces the number of times you have to replace the filter bag frequently and can realize the purpose of cost reduction and efficiency for you.
Acrylic Filter Bag Surface Post-Treatment
In the face of sticky dust, condensation, and explosive dust filtration conditions, FiltEdg can provide you with post-treatment on the surface of acrylic filter bags in the basic configuration (singeing, calendering), such as water and oil resistance, PTFE impregnation, PTFE membrane lamination, anti-static treatment, etc., so that you can cope with more complex conditions, protect your plant property safety, and improve the cleanliness of the emissions.
Acrylic Filter Bag Installation Structure
FiltEdge’s acrylic filter bags have the most common top configurations with snap band and flange type; acrylic filter bag bottom structure with reinforced disc bottom. These structures have excellent solidity and sealing, and you can use them to remove dust efficiently on pulse dust collectors. If your factory is using a reverse air baghouse, you can not easily replace the dust collector, and you need to face the high emission standards, we can customize the hanger cap, tie-on top, raw edge needle felt acrylic filter bag for you.
Why Choose Filtedge？
Filtedge is a US-based industrial filtration manufacturing supplier with a series of independently managed filtration factories in China for its core products. These factories strictly adhere to ISO quality management systems to produce high-quality filtration products. After over a decade of integration, Filtedge has established a comprehensive industrial filtration supply chain, with a robust quality control system to ensure seamless one-stop procurement for your needs.
We offer a range of services, including filter bag analysis, filter bag selection, operational condition analysis, filtration solutions, timely delivery, installation, and maintenance. Our pre-sales and after-sales teams provide comprehensive support throughout the entire process.
Choosing Filtedge means reducing your operational costs and enhancing your production efficiency!
Every acrylic filter bag you receive has passed our strict inspection before leaving the factory, and we can provide you with ISO inspection report.
Each batch of your acrylic filter bag raw materials, we will sample inspection for gram thickness, tensile strength test, shrinkage test, etc., for you to strictly control the quality off, to ensure 100% quality filter material.
We use 3-needle chain stitch, 25-30 stitches in 10cm to produce acrylic filter bags that are tensile, tear-resistant and do not leak dust for you.
Not only for each of your acrylic filter bags to detect the size, snap band elasticity test, but also will be on each filter bag illumination inspection, to eliminate pinhole leakage of ash. This ensures that you receive a bag that is just right for your dust collector.
Acrylic Filter Bag Specification
Below is a list of technical parameters, chemical properties, and common sizes of acrylic filter bags. You can also send us the working condition, our engineers with suitable filter bag drawings and parameters to contact you. And we can customize more suitable filter bag for you.
- Information Sheet
- Technical Specification
- Chemical Resistance Guide
- Standard Dimensions
| Material | Polyacrylonitrile Homopolymer |
| Weight | 350-600gsm |
| Finishing | Singeing/Calendering/Heat Setting/PTFE Membrane/Water and Oil Repellent Treatment/Antistatic Treatment
|
| Size | Customized |
| Continuous Temperature | 120°C |
| Peak Temperature | 140°C |
| Resistance to Hydrolysis | Good |
| Resistance to Acids | Good |
| Resistance to Alkalis | moderate |
| Resistance to Oxidation | Good |
| PH Value | 3-11 |
| Technical Property | Value / Specification |
| Material | 100% Polyacrylonitrile Homopolymer (Homopolymer Acrylic) |
| Manufacturing Method | Needle Punched Non-woven |
| Scrim / Base Fabric | 100% Homopolymer Acrylic Filament Scrim |
| Weight | 350 gsm – 600 gsm (Standard: 500 gsm / 550 gsm) |
| Thickness | 1.8 mm – 2.2 mm |
| Air Permeability | 10 – 18m³/(㎡.min) @ 200Pa |
| Tensile Strength | Warp: ≥1000 N/5cm | Weft: ≥1200 N/5cm |
| Elongation at Break | Warp: < 35% | Weft: < 50% |
| Thermal Shrinkage | ≤1.5% @ 150°C (302°F) for 90 mins |
| Continuous Operating Temperature | 120°C (248°F) |
| Peak Temperature | 140°C (284°F) |
| Resistance to Hydrolysis | Good |
| Resistance to Acids | Good |
| Resistance to Alkalis | Moderate / Fair |
| Resistance to Oxidation | Good |
| PH Value | 3 – 11 |
| Available Finishes & Treatments | Singeing, Calendering, Heat Setting, Water & Oil Repellent Treatment (Oleophobic), PTFE Impregnation, PTFE Membrane Lamination, Antistatic Treatment (Conductive Fiber Blended) |
| Environmental Factor | Rating / Resistance Level | Industrial Applications & Comments |
| Moisture & Hydrolysis | Excellent | 100% immune to water hydrolysis; eliminates premium failure risks in high-moisture flues (＜125℃). |
| Acid Resistance | Excellent | Highly stable against aggressive acid gases including SO2, SO3, NOx, and HCl. Ideal for chemical processing. |
| Alkali Resistance | Moderate / Fair | Reliable in weak alkaline conditions; avoid direct exposure to strong alkaline environments. |
| Oxidation Resistance | Good | Superior to PPS under medium temperatures, effectively resisting oxidation from oxygen-rich flue gas. |
| Abrasion Resistance | Good | Robust mechanical strength to handle high-velocity particulate and moderate-to-heavy dust load friction. |
| Filter Bag Shape | Common Diameter | Standard Length | Matching Top Design | Compatible Baghouse Type |
| Round / Cylinder Bag | Diameter 120 mm / Diameter 130 mm / Diameter 160 mm | 2.0 m – 6.0 m | Snap Band / Flange Top / Raw Edge | Top-loading Pulse Jet Baghouse (External Filtration) |
| Round / Cylinder Bag | Diameter 292 mm / Diameter 300 mm | 8.0 m – 12.0 m | Hanger Cap / Cord Top / Open Top | Reverse Air & Shaker Dust Collector (Internal Filtration) |
| Flat / Envelope Bag | Customized based on tube sheet | 1.0 m – 3.0 m | Collar Top / Pressed Plate | Compact Flat Bag Pulse Jet System |
For standard models in stock, the minimum order quantity is 10 units. For custom models, the minimum order quantity is 100 units.
In-stock filter bags typically ship within 1-2 days. Custom filter bags typically take 7-25 days, depending on the specific order quantity and manufacturing complexity.
Filtedge has obtained ISO 9001 quality management system certification. All products undergo rigorous testing procedures before shipment. If you require third-party testing, we can send samples to your designated laboratory.
Yes. We offer free samples of 1-2 units for testing to help customers confirm product compatibility.
Polyester filter bags work at about 110℃, acrylic filter bags can work continuously in 125℃. And the biggest advantage of acrylic filter bags is that they are not easily hydrolyzed and have excellent acid resistance. If you are using the filter bag in the environment with water vapor, high temperature and sulfur, then the acrylic filter bag extends the service life 2-3 times longer than the polyester filter bag, which can save you cost as well as reduce the frequency of changing the bag, and the comprehensive cost-effective will be higher.
FiltEdge’s acrylic filter bags are manufactured to tight tolerances of ±2mm. We measure the folded width, overall length, and diameter of the bag before it leaves the factory. If the filter bag cannot be installed due to our reasons, we promise to return it for a refund.
Of course it can be done. The simplest and most effective way is to do ePTFE membrane lamination treatment on the basis of ordinary acrylic filter bag, which can improve the filtration precision and make your factory reach the emission standard.
Yes, they can be used. Typically, blowback filters are more commonly used with woven filter bags, but for larger blowback filtration plants, FiltEdge can provide you with coated acrylic needle punched filter bags with anti-collapse spreader rings for blowback filtration, which will stabilize filtration, prevent sticking, and reduce emissions to meet stringent environmental standards.
Related Filter Bag
Used for <110℃ dry, conventional industrial dust interception. For example, cement back-end, woodworking, grain processing, surface coating.
Used for 200℃ high temperature, dry, with the risk of sparking conditions. For example: asphalt mixing plants, cement kiln heads, ironworks discharge yards.
Used in heavy industry with 240°C extreme high temperature, high air volume and limited budget.
For example: cement kiln end, steel blast furnace gas, copper and aluminum smelting.
Used in 260℃ extreme high temperature, extreme strong acid and alkali corrosion, high risk and high humidity working conditions. For example, waste incineration power generation, chemical plant core reactor.
Used in 160℃ high temperature, high sulfur, strong acidic flue gas. For example: coal-fired power plant boilers, biomass power generation.
Used for 260℃ high temperature, high dust concentration of fine filtration. For example, waste incineration, cement kiln, fine chemical industry.
